Installing Onyx Showers

lining pillowcase / pillow slip cover

Step by step implementation of the lining of the Federal

Making of the slip cover pillow

MATERIAL (Photo oo)
cushion to cover.
pattern with the right dimensions to the pillow that you want to play. Cloth for
back : cut into smaller abundant canvas embroidery, the length must be longer to fold.
scissors.
Pins.
sewing machine.

MATERIALS (Pic 00)
Pillow to be covered.
Needlework piece of appropriate size.
Fabric for the back : Bigger Longer and needlework of the piece.
Scissors.
Pins.
Sewing machine.


Photo 1 / Pic 1 :
First, you fold the bottom of the embroidery, turning back the fabric of the action you want (at least 7 mm.). Stop it with pins and irons with iron.

First of all, make a lapel at the bottom of the stitched piece. Choose how much you prefer the lapel on the back, But It Must Be Almost 7 mm.
Hold it with pins and iron.



Photo 2 / 2 Pic:
Now take a step with the sewing machine with a wire in the same color of the fabric.

Now, sew the lapel with the sewing machine, using a similar color thread.






Photo 3 / 3 Pic:
The fabric for the back must understand the internal component, so it must be longer than the embroidery, the extent of implication is proportionate to the size of the cushion cover. Make a first
blemishes the same way at the bottom of the fabric that will serve as the back. Even here, you choose the size, but at least 7 mm. Take a ride in the car.

The back fabric must Provide the inner lapel to hold the pillow, I know it Must Be Longer Than The needlework piece, the measure of the inner lapel is the pillow's shapely size. Make a little lapel
first at the bottom of the backfabric. Choose how much you prefer the lapel on the back, But It Must Be Almost 7 mm. Sew it.

Photo 4 / 4 Pic:
Take the second aspect, what will the pillow in its place so to speak. As I said, the measure is proportionate to the size of the pillow so you will have the same size on the front of the canvas embroidered on the back and fold the pillow. Sew the edges to keep it move.

Now make the second lapel, it will hold the pillow inside. The Exceed can not measure the size of the needlework piece: You'll Have The Same Size of the front side of the needlework piece, and the lapel on the back side.
Sew the two lateral margins of the lapel.

Photo 5 / 5 Pic:
Now superimpose, brow to brow, the two fabrics and secure them with pins to prevent them from moving. Sew the three sides except the bottom where you have already done the cuffs.

Place the two fabric, front at the front, and hold with pins. Sew the three sides
EXCLUDING the bottom side WHERE've made the lapels.








Photo 6 / 6 Pic:
Cut any excess fabric, not to create unsightly swelling.

Cut off the surplus as possible to Avoid lumps.

Photo 7 / 7 Pic:
Ready to reshoot?

Ready to turn over?













Last Photo 8 / 8 last Pic:
Here is the finished lining. Irons at the edges to flatten the seam swelling.

The pillow's cover is finished! Ireon it at the margin, to spread the lump of the sewing