Step by step to the completion of DIY Notebook 
linen book The Making of MATERIAL (all measurements are width by height)
Cartoons
for an A5 book:
2 cartons of 2 mm. 20x23 cm.
a board back from 2 mm. 4x23 cm.
2 cartons of 1 mm. 19.5 x22, 5 cm.
a cartoon for the central band of 1 mm. 3.5 x22, 5 cm.
for an A4 book:
2 cases 2 mm. 28x32 cm.
a board back from 2mm 7.5 x32 cm.
2 cartons of 1 mm. 27.5 x31, 5 cm.
a cartoon for the central band of 1 mm. 7x27, 5 cm.
Lino must be greater than at least 2.5 cm. cartons, each side.
for an A5 book : flax must be 50x28 cm.
for an A4 book : flax must be 70x37 cm.
On the right side should run the embroidery: un'imbastitura made to define the space which is the latest funeral, then that is the size of the inner carton, then:
for an A5 book : 20x23 cm.
for an A4 book : 28x32 cm.
fabric for the interior
must be greater than at least 2.5 cm. cartons, each side.
for an A5 book : flax must be 50x28 cm.
for an A4 book : flax must be 70x37 cm.
a single sheet wadding for stuffing
for an A5 book : 44x23 cm.
for an A4 book : 63,5 x32 cm.
are also required (Photo 00): Vinavil blue fabric
brush to spread the adhesive tape
Paper Scissors
Riveter and ring mechanisms
for an A5 book : mechanical 2 rings
for an A4 book mechanism: 4-ring
MATERIALS (all the sizes are Width x Height, european measurement) Cardboards
for an A5 book :
2 mm. Cardboards 20x23 cm 2.
2 mm. 1 cardboard plugs for the 4x23 cm.
1 mm. 2 Cardboards 19.5 x22, 5 cm.
1 mm. 1 cardboard for the spine 3,5x22,5 cm.
for an A4 book :
2 mm. 2 cardboards 28x32 cm.
2 mm. 1 cardboard for the spine 7,5x32 cm.
1 mm. 2 cardboards 27,5x31,5 cm.
1 mm. 1 cardboard for the spine 7x27,5 cm.
Linen
It has to be bigger at least 2,5 cm. for side, than the cardboards
for an A5 book : the needed linen piece is 50x28 cm.
for an A4 book : the needed linen piece is 70x37 cm.
The needlework has to be realized on the right side: make a basting to borde the maximum space you can stitch it (it is the dimensions of the cardboard) for an A5 book : 20x23 cm.
for an A4 book : 28x32 cm.
Fabric for the inner part
It has to be bigger at least 2,5 cm. for side, than the cardboards
for an A5 book : the needed linen piece is 50x28 cm.
for an A4 book : the needed linen piece is 70x37 cm.
Cotton in sheet for the padding
for an A5 book : 44x23 cm.
for an A4 book : 63,5x32 cm.
You need also (Pic 00): Glue for fabric
Brush, to spread the glue
Paper adhesive tape
Scissors
Riveter e Ring machinery
for an A5 book : machinery with 2 rings
for an A4 book : machinery with 4 rings
Realizzazione di un quaderno A5 / Making of an A5 linen book
Foto 1-2 / Pic 1-2 :
In the pictures you can see the embroidered on the cover and basting that marks the maximum space within which to run it.
In the pictures you can see the needlework stitched on the right side for the cover of the book and made basting the border to the maximum space.
Photo 3 / 3 Pic: 
Take the 2 mm. Join Them cardboard and paper with the taper in this order: the 20x23 + 4x23 + the spin the 20x23. The Longer Side is always the height of the book.
Photo 4-6 / 4-6 Pic:
Turn it upside down and on the extent not was then applied to the tape, glued to the sheet wadding for stuffing, use a few drops of glue qua e là, serve solo per non farla muovere. Ritagliate l'eventuale eccedenza.
Turn upside down (the side with the paper tape is now down) and paste the cotton in sheet for the padding . Apply some drop of glue, to not let it move. Cut off the possibile surplus.
Foto 7 / Pic 7 : 
Place the stitched linen on the cotton...
Photo 8 / 8 Pic:
... then turn upside down. The basting will help you to place it Correctly.
Photo 9 / 9 Pic:
Paste the redundant linen, start from the shorter side.
Photo 10-13 / 10-13 Pic:
Once glued the short sides, before proceeding to also paste the long ones, cut the excess fabric in the corner, as shown, so as not to form lumps.
Now it inside, take advantage of this time to position l'esterno finito ora sotto un peso, in modo da far aderire per bene la colla.
You have just paste the shoter sides. Before you procede with the longer ones, cut the surplus fabric at the corner, at showed in the picture 10. So you'll not have lumps at the corners.
The outiside part of the book is finished. Place it under pression, it will help the glue to cohere the parts. Now, let's procede with the inner part.
Foto 14-18 / Pic 14-18 :
Place the cardboard 1 mm. on the fabric you chose for the interior, cut it to each board, leaving everyone around the fabric needed for turning (2.5 cm. on the side).
Place the 1 mm. Cardboards You Have Chosen on the fabric for the inner part. Each cut the fabric around cardboard, leaving the Necessary to turn it and cover (2.5 cm. For side).
Photo 19-21 / 19-21 Pic:
Covered individually the two larger boxes, following the wisdom of the angle.
Cover up the two bigger Cardboards, remember the trick about the cover.
Photo 22-26 / 22-26 Pic:
Speech slightly different the central area: the cardboard glued to the fabric because of its length, and when turned over what it takes to finish, paste only the two short sides. The covering of the spines is a little different. Apply the glue to the cardboard and paste it to the fabric. Now, turn the fabric to cover, past But only the shorter sides, Showed like.
Photo 27-29 / 27-29 Pic:
Retrieve the outside of the notebook that we had put in pressure, spread a layer of glue on the back of the central strip and place the head covered with the fabric facing up.
Recover the outside part of the book, to spread glue layer on the pins and place the inner part spice just covered. The fabric has to be inverted.
Photo 30-33 / 30-33 Pic:
Now it's up to the other two coated paperboard : for these, a generous dose of glue to the exterior is coated for the cartoons, on the side of the box was discovered.
Now, it's time to apply the two Cardboards Remaining: to spread glue layer on Them Both and on the outside part of the book .
Photo 34-36 / 34-36 Pic:
Place the two boxes on the outside of the notebook, again with the fabric facing up, with delicacy and precision must be attached to the central belt. Press to adhere the glue. You will see that there will be a slight margin of a few millimeters from the outside of the notebook.
Place under a weight of the notebook lying for half an hour, so as to adhere and dry the glue.
Place carefully the cardboards on the outside part of the book, the fabric always upside. The inside panels have to be close fitting the spine. Push gently. You'll have a little margin (about 2 mm.) looking at outside part.
Place the splay book under pression for about a half an hour, in order to let the glue makes its work and dries.
Foto 37 / Pic 37 : 
Apply the ring with the Riveter machinery, centering it and RESPECT the height at about 4 mm. to the inner margin of the inside panel.
You have to place it in the right side of the inside part, you'll Have The cover on the left side.
last Photo 38 / 38 last Pic:
linen
Your book is finished! Remember to remove the basting
on the cover.
0 comments:
Post a Comment